How Can I Connect Linksys RE7000 Extender

Linksys RE7000 Extender Setup

Following the purchase of a new Linksys RE7000 extender setup tool. To get it working quickly and effectively, you must first complete the setup process. There are two alternative configurations for this gadget. Either access point mode or range extender mode can be used to do this.

In case you require assistance configuring a Linksys RE7000 router, please see the section below. In this part, we’ll provide you with a few simple configuration instructions so you can set up the Linksys RE7000 device on your own to function as a range extender.

RE7000 Linksys extender Simple setup instructions

Setting up a Linksys RE7000 extender is pretty simple. To do this, follow the procedures listed below.

Note :- Make sure your internet connection is up and working properly before continuing with the next set of steps. The Wi-Fi configurations of the router, including the SSID (Wi-Fi name) and security key, must also be understood by you (Password).

Step 1:-

  • Before turning on the Linksys router, connect it to a power source. After a brief interval, the LED indicator should become orange.

Step 2:-

  • Using just a PC or a smartphone, connect the device to the Linksys RE7000’s selected SSID. LinkSys Extender Setup-xxxx is the device’s chosen Wi-Fi name. Prior to beginning the setup process, Wi-Fi must be turned on.

Step 3:-

  • Start your PC’s preferred browser. Type “” into the address bar and press the enter key on your keyboard to go to the settings page. “” is the Linksys RE7000’s standard IP address.

Step 4:-

  • Press the “start setup” button when the setup screen appears. Create an admin password right now. Enter your preferred password in the “password” field. Enter the password again in the “Enter admin password again” box to confirm it.
  • Don’t forget to recommend a password. By pressing the save button, the password can then be entered.

Step 5:-

  • After pressing the next button, choose the next screen’s “As a wireless range extender” option. Choose the wireless network to which you are currently logged in. A password entry prompt will then appear.
  • Select the manually selected “Enter Network name and password” option if you have a private network name. If not, wait a short while for it to detect and select the wireless network automatically.

Step 6:-

  • The extended wireless password and network SSID must then be generated. You’ll then be taken to the location finder page. It can be used to measure the signal strength of the router and range extender.

Step 7:-

  • Visit the main Linksys website now. The system will now look for the most recent firmware version. If it is found, the most recent version will be downloaded and installed right away.
  • You can now use the range extender option on your Linksys RE7000. Now it will read “Dual-Band” wireless Range extender in the top header. You’ll be able to access the device’s web interface once you’ve finished this.

WPS Setup for Linksys RE7000 Extender

WPS is the quickest and simplest method for configuring a Linksys RE7000. The consumer doesn’t have to spend a lot of time on this. You can complete the RE7000 WPS Setup by following the instructions below.

How to set up Linksys RE7000 with WPS

  • Open the extender’s box first.
  • Attach a power supply to it.
  • The RE7000 should be placed in the same room as a home router.
  • After two minutes, watch for the orange light to turn green.
  • Press the WPS button on your AC1900.
  • Once a minute has passed, press the WPS button on the main router.
  • Wait until the WPS LED is completely green lit.
  • You can move your extension to the location of your choice now that its configuration is finished.
  • You can log into the web interface of your home router and look for the WPS option there if the WPS button is not readily apparent there.

Manual Setup for Linksys RE7000 Extender 

Do the setup instructions for the Linksys RE7000 given above not function? Do not fret! When configuring your Linksys RE7000 AC1900 WiFi range extender, take into account the advice offered below.

  • Carefully open the Linksys AC1900 RE7000 extender.
  • Place the WiFi range extender next to the wireless router in your house. When configuring the Linksys range extender, ensure that there is no more than 1-3 feet between the two devices.
  • Utilise an Ethernet cable to link your Linksys extender to the router.
  • Finally, power on your Linksys RE7000 by plugging it into an outlet.
  • Give the Linksys extender some time to start up. Orange is replaced with green on the power LED.
  • Next, turn on your PC and home WiFi router.
  • Launch a web browser of your choice.
  • Visit the Linksys setup page for extenders.
  • You eventually get at the Linksys RE7000 setup login screen as a result.
  • Enter the default login information for the WiFi extender.
  • It is necessary to click the “Login” or “Sign In” button.
  • You are sent to the Linksys RE7000 admin panel interface by the web browser.
  • As needed, configure your Linksys AC1900 extender by following the on-screen instructions.
  • When you’ve finished each step, click the “Save” button.
  • Move the WiFi extension by detaching it from the wall.
  • It must be turned on after being replugged into an outlet.
  • Attempt to link your laptop or computer to the WiFi extension.

How can my Linksys RE7000 firmware be updated?

Firmware, a hybrid of hardware and software, is essential to the effective operation of your extender. Periodically, you’ll get notifications for firmware updates, allowing you to get the newest security features and bug fixes.

To update the firmware on a Linksys RE7000, follow these steps:

  • Buy a smart device, like a laptop, desktop, or smartphone.
  • Enter in your favourite web browser after opening it.
  • Log in and configure your Linksys extender.
  • Choose the firmware upgrade option.
  • Afterward, choose CHECK FOR FIRMWARE.
  • Choose UPDATE from the menu now.

Note:- The firmware upgrade file is only available for download through, which is Linksys’ official website.

The Linksys RE7000 reset procedure.

If your Linksys RE700 wifi range extender has to be reset because it is experiencing some technical issues, you have come to the right place. In this tutorial, we’ll show you how to reset your Linksys RE7000 wifi range extender.

You may reset your Linksys RE7000 by doing the following:

  • Your Linksys RE700 AC1900’s reset button should be easy to find.
  • It might be reachable from the back or the bottom of the booster.
  • Once you’ve located it, push and hold it for ten seconds.
  • To finish the reset process, you must reboot the device one more time.

Note:- If you have any setup problems with your Linksys RE7000 extender, please contact us via live chat or New Extender setup.

Leave a Reply

Your email address will not be published. Required fields are marked *