How to Set up an Access Point – ap extender setup

Victony WiFi AC1200 Extender Setup

Any time you buy new equipment for your house or place of business, you might have to set it up, which could be a small nuisance. Installing new gadgets is a pure thrill for those who enjoy fiddling around the house, of course. However, some people find it tedious, want to do it right away, or don’t want to take the chance of harming the equipment.

LigoWave is available to simplify the process of setting up an access point easy and seamlessly. The general instructions for setting up an access point and the equipment required are provided below.For more information visit Victony WiFi AC1200 Extender Setup.

Necessities. Users will require the following items to configure their access points:

  • The main thing on the list is an access point. Access points give end devices another place to connect to a local area network, increasing the LAN’s coverage area.
  • A switch or router is required for managing and distributing data sent to, from, and between access points and endpoints within a local area network.
  • Ethernet cables are the wires required for connecting access points and other devices together to carry data at fast speeds.
  • a power adapter (if available), as certain access points may require one to operate. However, Power over Ethernet (PoE) is supported by the majority of contemporary access points, negating the requirement for separate power adapters.
  • For basic (or sophisticated) access point or configuration, a computer may be required.
  • Depending on the hardware and circumstance, a number of additional components could also be required. This might consist of a modem, installation discs for the access point driver/suite, extension cords, wall mounts, and other components.

Note:- If you need any help regarding your wifi extender so feel free and contact our technician or visit the official website that is ap.setup.

Step.1 :Setup the extender 

  1. Choose a good location for the gadget.

If it’s a wireless router, put it where it would be suitable while bearing in mind where the access point would be. This ensures that coverage is evenly distributed and that interference levels are kept to a minimum.

If the device is a switch or wired router, place it away from nearby interior solutions and any activities it might disrupt.

  1. Plug the router into an outlet and turn it on. Only an Ethernet cable will be needed for PoE-compatible devices instead of a power outlet. As soon as they are connected to a power source, certain gadgets also start up automatically.

Step 2: Get the access point setup.

  1. Choose a good location for the gadget.

Place the access point in a location where its wireless signal would have little to no interference with other wireless devices inside the LAN and where it would effectively cover the premises if the local area network has additional wireless devices, such as a router.

If the access point’s function is to add wireless connection to a wired LAN, it should be placed where the wireless signal may reach the widest possible area with the fewest obstructions and interference.

  1. If the device is powered by an AC/DC converter, plug it into an outlet and connect it to the access point.If it is a PoE connection, proceed to the next step.


  1. Plug in the cables.

The user will have to connect a number of cords.

  • Connect the access point and router with an Ethernet connection. The main Ethernet port on the access point and a LAN port on the router should both receive the cable. This connects the access point to the local area network that the router has established.
  • Connect the router and computer together using an Ethernet connection. The computer’s Ethernet port and a LAN port on the router should both accept the cable (typically there is only one). By connecting the computer to the network, direct access point and LAN management are made possible.
  • If it becomes necessary to make Internet access available across a local area network,Connect the modem and router together using an Ethernet cable. Connect the cable to the modem’s Ethernet port and the router’s primary Ethernet port (typically there is only one).

Step 4. Setup is step four. 

  • Manual LAN setup and even Internet connection configuration are almost obsolete thanks to modern technologies. 
  • The user is prepared to proceed once everything is securely linked and the devices have acknowledged one another’s presence on the network.
  • The computer or user handbook ought to include advice on what precise actions to take if any basic configuration is required, either for the access point or for the network in general.

By utilising the IP address or to connect to the router through a computer, users can also adjust advanced and optional router settings (or the address noted in the manual).


Leave a Reply

Your email address will not be published. Required fields are marked *