Users of Linksys extender are increasing day by day as it provide amazing internet services to people. But, after performing the Linksys extender setup did you change the default password? If not, then you should change it to secure the home network from the unauthorized users. If you are unaware of the procedure for how to change the default password of the device, then this post is for you. In this post, we are going to discuss all the instructions to change the admin details. So, don’t skip the information from the post otherwise, you will not be able to change the password successfully. Read on!
Before, we would like you to get ready some important things that you will need during the procedure. Preparing all the things before the process assists you in many ways.
Prerequisites | Change Linksys Extender Password
Here is the list that contains all the important requirements that you must need during the process:
- Reliable internet speed from the internet service provider.
- Non-damaged and working all outlets which supply sufficient power supply.
- Computer or laptop (you can use any one of them for the procedure).
- The updated version of the internet browser.
- You need the default web address of the extender.
- Note down all the default administration details.
These were the certain things that you have to get ready before the process. After that, you will be able to do the further procedure In the next section, we have explained all the steps properly. You can go through them to change the password of the device.
Steps to Change Linksys Extender Password
Boot Up the Device
Give the sufficient power supply to the Linksys extender so that it gives better outcomes. You can keep the following points in mind to give fluctuation-free electricity to the extender:
If your extender has a power cable then inspect the cable to ensure the cable is damaged or not.
Do not use the damaged power socket.
Thereafter, press the turn-on button until the device is on.
Make Connection Between Extender and Router
To establish a strong connection between the devices, use the Ethernet cable.
Check the cable first before inserting it into the device. (There should be no damages on the cable).
Insert the ends of the Ethernet cable properly into the devices. (Do not make the loose connection).
However, you can also use the wireless mode to connect the devices. Ensure that the extender and router are communicating properly with each other.
Switch on the Computer or Laptop
Now, boot up the computer or laptop. You can use any one of them as per your convenience. Your computer should have latest version of web browser.
Open the Web Browser
Once your respective device is booted up for the process, you need to launch the updated web browser because an outdated browser does not give better results.
Plus, delete all the extra trash from the device like cache and cookies because these files interrupt the process.
Access the Web Address
After opening the internet browser insert the default web address of the extender into the URL bar of the browser.
Note: Try to avoid the typos in the default web address otherwise you are not able to access it.
Log In to Extender
Now, you need to fill in Linksys extender login default credentials into the on-screen fields without making any typing mistakes. During typing keep the caps lock key of the keyboard off.
After that, click on the Log In button.
Change the Password
You will see the Linksys extender dashboard in which you need to follow the sub-steps mentioned below:
- Go to the Menu settings.
- Click on Advanced > Administration > Change Password.
- Now, you will see the Change Password panel.
- Here, you need to fill in the default password one time and the new password two times.
- Apply the settings and click on the Save button.
Now, your device’s default password has been successfully changed.
Conclusion,
This is how you can change the default admin details of the Netgear extender in a hassle-free manner. You just need to follow all the above-mentioned steps without making any mistakes.
